Electroplating is a technique to plate some metal or non metal with metal using electric current. While anodizing is plate metal like aluminum by inserting some substance under the oxidized layer of aluminum by using of electric current force. The function and the effect of both process may the same, like have color surface so that can use as decorative purposes.
Not all metal can use anodizing process but only certain metal can use this method to make endure to corrosion effect. Aluminum metal can be treated by anodizing because after electric current process make the aluminium have oxidized layer on the surface and this layer can have wide pore so that other chemicals like dye or prevented agent to be impregnated to enter this oxidized layer. After certain substance enter into this oxidized layer then by certain method the pore can be closed by further process. Actually by using just electric current will create anodized layer, but the problem this layer have no colour and look bad, to make this more interesting then on anodizing process using colour agent and inserted below the anodized layer.
Electroplating is directly plate other metal into certain metal with the goal to make more interesting or make more endure to corrosion or from other outside effect. Like on hard chrome plating on screw driver, can make this surface hard and not easy to break if not plate by hard chrome. By nickel plating on other metal will make the surface is endure from reaction effect because nickel more noble than the metal below the nickel surface. Nickel plating usually use in canning process, or use in decorative accessories. Electroplating rely on the plate stick strong, more strong certain plating metal stick to the base metal is better.
Not all metal can use anodizing process but only certain metal can use this method to make endure to corrosion effect. Aluminum metal can be treated by anodizing because after electric current process make the aluminium have oxidized layer on the surface and this layer can have wide pore so that other chemicals like dye or prevented agent to be impregnated to enter this oxidized layer. After certain substance enter into this oxidized layer then by certain method the pore can be closed by further process. Actually by using just electric current will create anodized layer, but the problem this layer have no colour and look bad, to make this more interesting then on anodizing process using colour agent and inserted below the anodized layer.
Electroplating is directly plate other metal into certain metal with the goal to make more interesting or make more endure to corrosion or from other outside effect. Like on hard chrome plating on screw driver, can make this surface hard and not easy to break if not plate by hard chrome. By nickel plating on other metal will make the surface is endure from reaction effect because nickel more noble than the metal below the nickel surface. Nickel plating usually use in canning process, or use in decorative accessories. Electroplating rely on the plate stick strong, more strong certain plating metal stick to the base metal is better.